Veris-industries H8920-4 Install Manuel d'utilisateur télécharger pdf

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

POWER MONITORING

INSTALLATION GUIDE

H89 20-4

Installer’s Speciﬁcations

LonWorks® Network Free topology transceiver, 78 kbps

Modbus Network RTU 9600 BAUD, 8N1 format

Network Variable Type Fixed point real

Input Power 16-24 VAC/DC, 100mA (max.)

Temperature Range 0 to 60°C (32 to 140°F)

Humidity Range 0 - 95% non-condensing

DIMENSIONS

LONTalk Integration Node For Use With

H704 and H663 Branch Current Monitors (BCM)

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.

• This equipment must only be installed and serviced by qualiﬁed electrical personnel.

• Read, understand and follow the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on or inside the equipment.

• Use a properly rated voltage sensing device to conﬁrm power is oﬀ.

DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION

• Only install this product on insulated conductors.

Failure to follow these instructions will result in death or serious injury.

DANGER

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classiﬁed locations.

• The installer is responsible for conformance to all applicable codes.

• Mount this product inside a suitable ﬁre and electrical enclosure.

FCC PART 15 INFORMATION

NOTE: This equipment has been tested by the manufacturer and found

to comply with the limits for a class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Modiﬁcations to this product without the express authorization of

Veris Industries nullify this statement.

PRODUCT IDENTIFICATION

H89 20-4

4.25"

(108 mm)

2.12

(54 mm)

1.16"

(30 mm)

4.25"

(108 mm)

1.53"

(39 mm)

Wire Opening

1.16"

(30 mm)

SERVICE TX RX

MODBUS

Hawkeye

8920 Series

MODEL DESCRIPTION

H8920-4 H704/H663 to LonTalk® integration node

1 2 3 4 5

Résumé du contenu

Page 1 - H89 20-4

Page 2 - INSTALLATION GUIDE

Page 3

Page 4

Page 5 - BRANCH CURRENT MONITORS

Commentaires sur ces manuels

Pas de commentaire

Veris-industries H8920-4 Install Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Veris-industries H8920-4 Install. Veris Industries H8920-4 Install User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Veris-industries H8920-4 Install