Veris-industries MSBPM1x Install Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Veris-industries MSBPM1x Install. Veris Industries MSBPM1x Install User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
ZL0031-0B PAGE 1 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 02121
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
OCCUPANCY SENSORS
INSTALLATION GUIDE
Wall Switch Replacement Occupancy Sensors
Installer’s Specifications
Input 120 or 277VAC ±10% 60 Hz
Output 120 VAC, 1000 W max. tungsten incandescent load; 1000 VA max. ballast load;
¼ hp max. motor load; 277 VAC; 1800 VA max. ballast load
Temperature 0° to 50°C (32° to 122°F)
Humidity Max. 90% RH non-condensing
Agency Approvals UL and cUL Listed; FCC part 15 for Home and Oce Use (Class B)
MSBPM1x MSBPM1x
DIMENSIONS
NOTICE
This product is not intended for life or safety applications.
Do not install this product in hazardous or classified locations.
Read and understand the instructions before installing
this product.
Turn off all power supplying equipment before working on it.
The installer is responsible for conformance to all applicable codes.
PRODUCT IDENTIFICATION
4.2”
(107 mm)
4.5”
(114 mm)
1.8”
(46 mm)
2.8”
(69 mm)
1.3”
(33 mm)
LED
PIR Motion Sensor Lens
Time-delay Setting:
15 sec. min. (fully CCW)
30 min. max. (fully CW)
Manual On/O Button
(Push On, Push O)
Bypass
button
(In = Always ON,
Out = Normal Operation)
Sensing
Technology
= Passive Infrared
(PIR)
MSB P
ColorTurn On # of circuits
= Manual
1
W = White
V = Ivory
OPERATION
MSBPM1x wall switch occupancy sensors use passive infrared technology (PIR)
to combine occupancy detection and voltage switching in a single package. The
MSBPM1x replaces existing standard light switches in home or oce environments,
providing major motion detection up to 1000 sq. ft., and minor motion detection up
to 400 sq. ft., over a 180° range. The sensor is equipped with an manual on/o button
to switch between the on and o position, while a bypass button provides “always
on” capability. The time delay before the switch deactivates is user adjustable from
15 seconds to 30 minutes.
COVERAGE PATTERNS
Top View
35 ft
(10.7m)
10 ft (3.1m)
15 ft (4.6m)
25 ft (7.6m)
35 ft
(10.7m)
Side View
4 ft
(1.2m)
Minor Motion
Major Motion
M
Vue de la page 0
1 2

Résumé du contenu

Page 1 - MSBPM1x MSBPM1x

ZL0031-0B PAGE 1 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 02121Alta Labs, Enercept, Enspector, Hawkeye, T

Page 2 - INSTALLATION GUIDE

ZL0031-0B PAGE 2 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 02121Alta Labs, Enercept, Enspector, Hawkeye, T

Commentaires sur ces manuels

Pas de commentaire