Veris-industries AA10 Install Manuel d'utilisateur télécharger pdf

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

ENVIRONMENTAL SENSORS

INSTALLATION GUIDE

Temperature Range Conguration

AA10

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classied locations.

• Read and understand the instructions before installing

this product.

• Turn oﬀ all power supplying equipment before working on it.

• The installer is responsible for conformance to all applicable codes.

No responsibility is assumed by Veris Industries for any consequences arising out of the

use of this material.

DIMENSIONS

AA10

PRODUCT IDENTIFICATION

°C °F Order Code

-50 to 50 -58 to 122 1

0 to 50 32 to 122 2

0 to 100 32 to 212 3

10 to 35 50 to 95 4

0 to 150 32 to 302 5

-18 to 38 0 to 100 6

-18 to 121 0 to 250 7

-18 to 66 0 to 150 8

-29 to 66 -20 to 150 9

-60 to 70 -76 to 158 10

0 to 66 32 to 150 11

Example:

AA10C3

1.3”

(32mm)

nominal

1.5” (39mm)

1.0” (26mm)

INSTALLATION

1. Disconnect power to the control panel.

2. Wire the AA10 as shown in the Wiring section. For a 1-5 VDC output, use a 250 Ω

resistor (not included).

3. Refer to the Product Identication chart to determine the output temperature

range scaling.

SPECIFICATIONS

Transmitter:

Input Voltage 12 to 24VDC

Loop Resistance 250 Ω, 13.5V min.; 500 Ω, 18.5V min.

Output 4-20mA, 2-wire, loop powered; 1-5VDC with 250 Ω resistor

Transmitter Accuracy ±2.5% of span (typical)

Adjustment ±5% zero and span

Ambient Temperature 0° to 50°C (32° to 122°F)

Encapsulation Epoxy encapsulated

Sensor (sold separately):

Sensor Type RTD, Platinum, 100 Ω, 0.0385α

Sensor Accuracy ±0.30°C

Conversion Resistor 250Ω min. ¼ watt

WIRING

Current Output

POWER SUPPLY

12 to 24 VDC

DIGITAL CONTROL

RTD

Temperature

4-20 mA return

–

Voltage Output

POWER SUPPLY

12 to 24 VDC

DIGITAL CONTROL

RTD

Temperature

1-5VDC return

–

250Ω

AA10SPC01363

AA10SPC01365

AA10SPC01366

°C °F

-7 to 49 20 to 120

0 to 30 32 to 86

-10 to 10 14 to 50

PRODUCT OVERVIEW

The AA10 is intended for use with a 100 Ω platinum RTD (0.0385α) to provide either a

4-20 mA or a 1-5 VDC temperature signal.

INSTALLATION GUIDE 1

Résumé du contenu

Page 1 - INSTALLATION GUIDE

Commentaires sur ces manuels

Pas de commentaire

Veris-industries AA10 Install Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Veris-industries AA10 Install. Veris Industries AA10 Install User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Veris-industries AA10 Install