Veris-industries SDI SERIES Datasheet Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Veris-industries SDI SERIES Datasheet. Veris Industries SDI SERIES Datasheet User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
flow
VERIS INDUSTRIES
800.354.8556
+1 503.598.4564
www.veris.com
Insert Meter, Small
Diameter Impeller (SDI)
DESCRIPTION
The Veris direct insert style liquid ow sensor with stainless steel/PPS plastic or PEEK
plastic tip combines ow sensing with a built-in transmitter for an all-in-one ow
measuring system. This device ts all 1-1/2” to over 36” (38 to 915 mm) pipes, and it
is intended for direct installation into the pipe through a 1” NPT hole.
This sensor is available with or without hot tap capability. In the hot tap installation,
the sensor is mounted in the pipe under pressure by attaching a service saddle or
weld-on tting to the pipe. Then the sensor assembly is attached to an isolation
valve and extended into the pipeline to measure ow. Hot tap installations are often
required in retrot projects, but even in new construction, a hot tap sensor can be
desirable for service considerations.
Software and programming cable are required to operate these meters. If the meter
will be used for hot tap installation, the A1027 tool is also needed (see Ordering
Information).
APPLICATIONS
● Flow measuring projects
● True hot tap installations
● BTU applications (requires temperature sensors and transmitter/monitor)
FEATURES
● NEMA 4 electronics housing...rugged and weather-proof
● Scaled pulse and 4-20mA output available
● Viton® O-ring seal...no leaks
● Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...
highly durable
SPECIFICATIONS
Recommended Design Flow Range 0.3 to 20 ft./sec
Pressure Rating 1000 psi @ 21°C (70°F)
Maximum Temperature Rating 135°C (300°F)
Operating Temperature Electronics: 20° to 65°C (14° to 150°F)
Pressure Drop 0.5 psi or less @ 10 ft/sec for all pipe sizes 1.5” dia and up
Accuracy ±1% of rate over optimum ow range*
Repeatability ±0.5%
* ≥10 upstream and ≥5 downstream straight pipe diameters, uninterrupted ow.
Ideal For Pipe Sizes 1-1/2” To
Over 36”
SDI0H1N20-0200
SDI1D1N20-0200
Year
Warranty
1
SDI SERIES
HQ0001777.C 01131
1
2
Résumé du contenu
Page 1 - Diameter Impeller (SDI)
flowVERIS INDUSTRIES800.354.8556+1 503.598.4564www.veris.comInsert Meter, Small Diameter Impeller (SDI)DESCRIPTION The Veris direct insert style liqu
Page 2 - ORDERING INFORMATION
flow800.354.8556+1 503.598.4564www.veris.comDIMENSIONAL DRAWINGSMODEL MANUF. PART # DESCRIPTIONU001-0020 A301-20* Flow, Programming Cable with CD for
Produits connexes et manuels pour Équipement Veris-industries SDI SERIES Datasheet
(16 pages)Xerox 700i-700 Digital Color Press mit Xerox CX Print Se podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Sprzęt komputerowy Xerox 700i-700 Digital Color Press mit Xerox CX Print Se.
Dostarczamy 1 pdf podręczników Xerox 700i-700 Digital Color Press mit Xerox CX Print Se do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commentaires sur ces manuels